Ball y poppet válvulas de compuerta

PCE mantiene en stock 6100 y 6200 series ball y poppet check valve fluid control components, abajo detallamos las características técnicas:

APLICACIONES:

• Previene fluido en ssentido contrario para proteger solenoids, regulators y pumps.
• Bloquea la presión en cilindros hidraúlicos.
• Válvula de relief en línea de baja presión.
• Vávula de ventilacion para purgar el sistema.

CARCTERÍSTICAS y ESPECIFICACIONES:

• Body material: 316 stainless steel, brass, Monel® R-405.
• Maximum operating pressure: Stainless steel – 6000 psig at 70 °F (414 bar at 21 °C). Brass – 3000 psig at 70 °F (414 bar at 21 °C). Monel® – 6000 psig at 70 °F (414 bar at 21 °C).
• Operating temperature range: Buna N – -40 °F to +200 °F (-40 °C to +93 °C). Viton® – 20 °F to +350 °F (-29 °C to +177 °C).
• Orifice sizes: 0.187” to 0.422” (4.75mm to 10.7mm).
• Cv factors: 0.3, 2.4.
• O-ring seat provides leak-tight shut-off.
• Internal design guides flow around or inside spring, not through coils, when valve is open.
• All models are tested in production to assure a leak-tight body joint and seat.
• Ball and poppet designs are available as standard.
• Ball type provides effective leak-tight closure minimum flow resistance.
• Poppet models provide large flows with a minimum of chatter and fluctuation.
• Valves are available with various cracking pressures, from 1⁄3 to 25 psig.
• 2-piece body permits interchangeability of end connections.
• Special High Tolerance NPT Thread.